User Manual Part 3

Page 3-13
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
(a) The ARINC 615A UPLOAD operation is used to transfer the data files to the Modman.
The AIT F-SIM-LDR ARINC 615A data upload information dialog box screen shot is
shown in Figure 3-5.
Figure 3-5. AIT F-SIM-LDR ARINC 615A Data Upload Information Dialog Box
(b) The UPLOAD process is initiated by selecting an individual LSAP or ARINC 665 media
set containing one or more LSAPs.
(c) In the Upload File Selection dialog, the Files of type: drop down list can be used to select
if either a Media set (Loads(*.LUM)) or an individual LSAP (Header Files (*.LUH)) will be
selected for the UPLOAD.
(d) In the ARINC-665 Upload File Selection dialog window, the operator can view the list of
files.
1
The files can be selected either as a media set or an individual LSAP for the
UPLOAD.
2
Individual LSAPs are selected by choosing the Load Header (.LUH) (Header Files
(*.LUH)) file associated with the load.
3
For loading entire JetWave™ AES media set, the Loads.LUM file at the root of the
media set must be selected (Loads (*.LUM)).