User Manual Part 3

Page 3-11
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
(2) Preparation for Loading Software
(a) Click to bring up the 665 Media window on the data loader.
(b) Select Media Repository and click OK button. Most of the data loader will automatically
select the media repository folder and brings up the Select Media Set window.
(c) In the Select Media Set window, the operator will be able to see the packaged software
data files.
(3) FIND Loadable Targets
(a) The ARINC 615A FIND operation is used to identify available loadable target systems.
The loadable targets responding to the FIND request will be shown after the timeout on
the data loader, indicating target identification and source address (IP) information.
Figure 3-4 shows the screen shot of AIT F-SIM-LDR ARINC 615A FIND dialog box.
Figure 3-4. AIT F-SIM-LDR ARINC 615A Find Dialog Box
(b) For Data load operation, following static IP addresses are assigned to JetWave™ AES
LRUs.
Modman IP address: 172.29.55.1/24
KANDU IP address: 172.29.55.2/24
OAE IP address: 172.29.55.3/24.