User Manual Part 3

Page 3-9
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
In the above listing, upload is defined as the transfer of a data set from the ARINC 615A data
loader and a download is defined as the transfer of a data set from Modman to the ARINC
615A data loader. For JetWave™ AES LRUs where data download operation is not
supported, the system will return 0x1002 status code.
The ARINC 665 media package include *.LUM files for each of JetWave™ LRUs. This along
with LOADS.LUM and FILES.LUM are assembled to form a 665 package which include a
manifest file as a compressed file format. The ARINC 665 media set of JetWave™ system
comprises of:
• LOADS.LUM: Describes the loads that the media device carries, one or more.
• FILES.LUM: Lists all the files, excluding itself, on the media.
• *.LUH is the load part index file which the LOADS.LUM points to.
• *.LUP is the data file which contains compressed software image/images and manifest
files.
During the data loading process, the respective LRU unzips the file and extracts the manifest
file and the images. Each LRU identifies the part for itself from the manifest file.
The .LUP files that follow are included as part of ARINC665 media file for different AES LRUs.
• Modman operational data
• AES configuration data
• KRFU operational image
• KANDU operational image
• OAE-TMA operational image
• OAE- FMA operational image.
NOTE:
More than one CONFIG sub parts may be present in a configuration load, one per
AES configuration file type.
For the ARINC 615A data load operations, an A615A target connection must be defined.
Target connection defines a TFTP client on the Modman and TFTP server on the data loader
that will be used for file transfer.
KANDU JetWave™ KANDU LRU operational
file
Upload only, through the Modman
KRFU JetWave™ KRFU LRU operational
file
Upload only, through the Modman
OAE-FMA
or
OAE-TMA
JetWave™ OAE LRU operational file Upload only, through the Modman
Table 3-2. Data Sets(Cont)
LRU Data Set Transfer Process