User Manual Part 3

Page 3-2
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
• ARINC
• MCN (for the China market)
• INMARSAT (for Lufthansa, Germanwings, Swiss, Austrian, and Eurowings)
• Distribution Partners:
•Satcom1
• Satcom Direct
•SITA OnAir
• Gogo Business Aviation
• ARINC Direct
The actual throughputs achieved by the GXA terminal are dependent on the Airline Operator
subscription. Each subscription will have a defined Committed Information Rate which is the
minimum throughput guaranteed to each subscriber. The delivered services will be able to exceed
those CIRs where the resources allow up to maximum spot beam capacity. All instantaneous
demand will be matched to provisioned CIRs for every priority level before any remaining
bandwidth is allocated to satisfy any provisioned Maximum Information Rates.
The user connectivity is provided by the Modman LRU of the JetWave
TM
system. The Modman
traffic ports to which these user devices gets connected is configurable through the ground based
NMS of the Value Added Resellers / Distribution Partners of Inmarsat GX network. This over the air
configuration functionality supports the ARINC 791 domain segregation and other VAR/ DP
requirements. In addition, the VAR /DPs may also gather statistics on the user domain ports of the
JetWave
TM
system for reporting at their NMS.
On initial power-up of the system, after uploading the JetWave
TM
system configuration files and
entering the aircraft tail no, the JetWave
TM
system first gets associated to the Inmarsat test
network. On the next power up the system is associated to the appropriate VAR / DP network,
where the Service Level Agreements, the aircraft tail no and the pre-assigned JetWave
TM
system
terminal ids are linked for billing and service.
2. About Installation and Registration
The JetWave™ subsystem LRUs that follow support registration of hardware targets with the FIND
protocol in accordance with the A615A data load protocol:
(1) Modman
(2) KANDU
(3) OAE- either FMA or TMA.
3. Product Support Services
A. Customer Support Overview