User Manual Part 3

Page D-6
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
B. A791 Based OAE-FMA with the AIM Checklist
Section Parameter Item NA √ Value
A. Maintenance Panel Applicability If the system is not wired to another
aircraft system, a maintenance panel is
required.
Discrete output
connections
System available (Modman MP13E)
connected to a lamp
Data link available (Modman MP13F)
connected to a lamp
Discrete input
connections
Local data load enable (Modman
MP10B) connected to a normally open
switch
Ground transmit enable (Modman
MP11D) connected to a normally open
switch
Public service disable (Modman MP11E)
connected to a normally open switch
Modman reset (Modman MP10C)
connected to a normally open switch
Ethernet port
connections
AV1 (Modman TP BB1 thru 4) connected
to a RJ45 Ethernet connector
Additional
electrical wiring
Electrically wire and interconnect in
accordance with Figure 2-33.
B. Modman Physical Examine for physical damage.
Environmental conditions, refer to
Figure 2-24
Mounting tray Install applicable 4-MCU tray, supplied
by customer.