User Manual Part 3

Page B-8
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
3 In Service Related Sub Branch
The .honAkInService (3) folder contains objects to supports in-service status and
statistics for the maintenance branch of the MIB as shown in the below details:
.honAkModmanToKrfuRfLink(19) TruthValue The Modman to KRFU RF link state.
True = Okay/Not Available, False =
Failed
.honAkKrfuToModmanRfLink(20) TruthValue The KRFU to Modman RF link state.
True = Okay/Not Available, False =
Failed
.honAkOaeToKrfuRfLink(21) TruthValue The OAE RF Link to KRFU state.
True = Okay/Not Available, False =
Failed
.honAkApmToModman(22) TruthValue The APM to Modman serial data
state. True = Okay/Not Available,
False = Failed
.honAkIrsStatus(23) honAkIrsStatus This object reports the IRS status.
IRS inactive is to be reported if the
KANDU is not in communication
with the Modman and it is the IRS
source.
.honAkAesReset(24) TruthValue Write = True cause a system reset,
a write = False causes no action. A
read always returns false and
perform no Action.
.honAkModmanThermalState(25) HonAkThermalStat
e
the thermal state of the Modman
.honAkKanduThermalState(26) HonAkThermalStat
e
the thermal state of the KANDU
.honAkKrfuThermalState(27) HonAkThermalStat
e
the thermal state of the KRFU
.honAkOaeThermalState(28) HonAkThermalStat
e
the thermal state of the OAE
Object Identifier Type Range Description
.honAkMaintSatLinkState(1) HonAkSatLinkState The state of the satellite link
.honAkTxMuted(2) TruthValue Whether or not the terminal has
muted the satellite transmission. True
= muted, False = may be transmitting
.honAkTxMutedReason(3) honAkTxMutedReason Reason for muting the satellite
transmission
.honAkSatHandoverPending(4) honAkSatHandoverPendin
g
whether a satellite handover is
expected shortly
.honAkLinkStartTime(5) DateAndTime RFC2759 Time at which the current satellite was
established, or 1/1/1970 after a reset
or if the link is not active
.honAkLinkEndTime(6) DateAndTime RFC2759 Time at which the satellite link was
closed. After a reset and before a
satellite has been established, the
value will equate to 1/1/1970.