User Manual Part 3

Page B-6
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
The .honAkLinkStatus (1) folder contains object as shown in the details below:
2
System Related Sub Branch
The .honAkSystem (2) folder contains objects as shown in the details below:
3
Service Notification configuration Related Sub Branch
The .honAkServTrapsConfig (3) folder contains objects as shown details below:
(c) Maintenance Related objects
The .honAkMaintenance (3) folder contains all maintenance relevant information
including system health status, interface status, link status, equipment information and
some configurable parameters that can be set by a client application.
1
Operation Status Related Sub Branch
The .honAkInstallAndCalibration (1) folder contains objects as shown in the
detail below:
2
System Health Related Sub Branch
The .honAkSystemHealth (2) folder contains objects as shown in the details
below:
Object Identifier Type Range Description
.honAkServSatLinkState (1) HonAkSatLink
State
This object shows the state of the satellite link.
.honAkServTxOnGround (2) honAkServTxO
nGround
This object indicates whether RF Transmission is
allowed on Ground or not.
Object Identifier Type Range Description
.honAkServSysManufacture (1) DisplayString 0..32 ASCII String with up to 32 characters to reports the
name of the system manufacture.
.honAkServUnavailReason (2) honAkServUna
vailReason
The reason the Internet service is not available.
Object Identifier Type Range Description
.honAkServTrapsDestIpAddr (1) IpAddress The destination IP Address for Service traps.
If the value of the object is 0.0.0.0, the trap will not
be sent.
.honAkServTrapsDestPort (2) Unsigned32 0..65535 The destination port number for Service traps.
Default on reset 162.
Object Identifier Type Range Description
. honAkInstallNoOae (1) TruthValue Default on reset is False, True means operation
without an OAE operation is allowed
Object Identifier Type Range Description
.honAkAesHealthStatus(1) HonAkHealthStatus This object reports the health status
of the AES. It is an enumerated
integer. Normal during initialization.