User Manual Part 3

Page B-5
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
(k) Satellite Handover Type definition
The SNMP honAkSatHandoverPending reports the satellite handover state. It is an
enumerated integer value with the structure as shown in Table B-9.
Table B-9. Satellite Handover Enumeration Type
(l) Transmission State on Ground Type Definition
The SNMP honAkServTxOnGround report if transmission on the ground is allowed. It is
enabled by discrete input. It is an enumerated integer value with the structure as shown
in Table B-10.
Table B-10. Transmission State on Ground Enumeration Type
(m)
Port link status Type definition
The SNMP honAkPortInfoOperStatus indicates the current link status of the port. That
is, whether the port is currently passing data in either direction within a 10 second trailing
window. It is an enumerated integer value with the structure as shown in Table B-11.
Table B-11. Port Link Status Enumeration Types
(2) MIB Object Under Mandatory Branches
This section contains various branches detailing what is in each branch and the parameters
/meanings.
(a) MIB Version Related Objects
The .honAkVersion (1) folder contains only one object .honAkEngMibVer as shown in
the detail below:
(b) Service Related objects
The .honAkService (2) folder contains all service relevant information and some
configurable parameters that can be set by a client application as follows:
1
Link Status Related Sub Branch
SNMP Type
Number
Description
yes 1 Satellite Handover is pending.
no 2 Satellite Handover is not pending
unavailable 3 Satellite Handover information not available
SNMP Type
Number
Description
txAllowed
1
RF Transmission is allowed on the ground
txInhibited 2 RF Transmission is not allowed on the ground
SNMP Type
Number
Description
active
1
Port Link Status is active
inactive 2 Port Link Status is not active
Object Identifier Type Range Description
.honAkEngMibVer (1) Unsigned32 This object defines the version number of this MIB