User Manual Part 3

Page B-4
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
(g) Tenths Unsigned32 Type definition
The SNMP type HonAkTenthsUnsigned32 cause an Unsigned32 that expresses
something in tenths to be displayed in a floating point way.
• For example, consider the case where an object that uses this TC and contains a
value of '1234'. This object would be displayed as '123.4'.
(h) Tenths Integer32 Type definition
The SNMP type HonAkTenthsInteger32 cause an Integer32 that expresses something
in tenths to be displayed in a floating point way.
• For example, consider the case where an object that uses this TC and contains a
value of '-1234'. This object would be displayed as '-123.4'.
(i) IRS Status definition
The SNMP honAkIrsStatus reports the IRS status. It is an enumerated integer value with
the structure as shown in Table B-7.
Table B-7. IRS Status Enumeration Type
(j) Mute Reason Type definition
The SNMP honAkTxMutedReason report the reason the terminal has self muted. It is
an enumerated integer value with the structure as shown in Table B-8.
Table B-8. Mute Reason Enumeration Type
SNMP Type Number Description
ok
1 IRS is active and OK
IRS Aligning 2 IRS is in alignment
IRS Inactive 3 IRS is not active and not reporting data
IRS Fail 4 IRS has indicated failure
SNMP Type
Number
Description
notMuted(1) 1 Not muted, transmitting
skewAngle(2) 2 Muted because skew angle exceeds regulatory limits
notLocked(3) 3 Not locked
notPointing(4) 4 Not currently pointed
structureBlockage(5) 5 Aircraft structure blockage
onGround(6) 6 On-ground
fault(7) 7 Fault
notReady(8) 8 Not Ready for operation, booting etc
geoRestriction(9) 9 Service is disabled due to Geographic position inside a
restricted region