User Manual Part 3

Page 3-87
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
IRU Input Bus
(70)
Flight phase (41) 0x 0004 SSM FW Expected label is in failure warning:
If a fault is critical, the system will not
work.
If the fault is a warning, the label is
expected but not there, system will
continue to operate.
0x 0005 SSM NO Normal operation, system is good.
MLG ground
condition (42)
0x 0001 Missing Expected label is not there:
- Make sure that the system configuration
expects the correct label.
- Check aircraft system is supplying the
correct label on the bus.
If fault is critical, the system will not work.
If fault is a warning, the label is expected
but not there, the system will continue to
operate.
0x 0002 SSM FT Expected label is in functional test:
This is expected, but is recorded as a
debug aid.
If a fault is critical, the system will not
work.
If the fault is a warning, the label is
expected but not there, system will
continue to operate.
0x 0003 SSM NCD Expected label is in no computed data:
This is expected, but is recorded as a
debug aid.
If a fault is critical, the system will not
work.
If the fault is a warning, the label is
expected but not there, system will
continue to operate.
0x 0004 SSM FW Expected label is in failure warning:
If a fault is critical, the system will not
work.
If the fault is a warning, the label is
expected but not there, system will
continue to operate.
0x 0005 SSM NO Normal operation, system is good.
GNSS sensor
status word (80)
0x 0000 Self test mode Will be available in future revision
0x 0001 Initialization mode
0x 0002 Acquisition mode
0x 0003 Navigational mode
0x 0004 Attitude aiding mode
Table 3-20. L3 Codes (Cont)
L1 L2 L3 Code L3 Description Repair Action