User Manual Part 3

Page 3-71
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
KANDU OAE
Ethernet Bus
(30)
KANDU input (01) 0x 0003 Ethernet normal System is good.
OAE input (02) 0x 0000 Ethernet no layer 1 Indicates nothing is connected:
- Check wiring between boxes.
- Check TX box is operating.
- Check RX box is operating.
0x 0001 Ethernet no traffic Is a warning that on traffic has been seen
on the bus, but layer 1 is established so a
physical link exists.
0x 0002 Ethernet high packet
loss
There is an intermittent wiring problem or
hardware fault.
0x 0003 Ethernet normal System is good.
KANDU OAE
Serial Control
Bus (31)
KANDU input (01) 0x 0001 Serial Inactive Is a warning that on traffic has been seen
on the bus:
- Far end is not talking.
- Wiring problem.
- Input problem.
0x 0002 Serial High packet loss There is an intermittent wiring problem or
hardware fault.
0x 0003 Serial Normal System is good.
OAE input (02) 0x 0001 Serial Inactive Is a warning that on traffic has been seen
on the bus:
- Far end is not talking.
- Wiring problem.
- Input problem.
0x 0002 Serial High packet loss There is an intermittent wiring problem or
hardware fault.
0x 0003 Serial Normal System is good.
KANDU OAE
Serial IMU Bus
(32)
KANDU input (01) 0x 0001 Serial Inactive Is a warning that on traffic has been seen
on the bus:
- Far end is not talking.
- Wiring problem.
- Input problem.
0x 0002 Serial High packet loss There is an intermittent wiring problem or
hardware fault.
0x 0003 Serial Normal System is good.
OAE input (02) 0x 0001 Serial Inactive Is a warning that on traffic has been seen
on the bus:
- Far end is not talking.
- Wiring problem.
- Input problem.
0x 0002 Serial High packet loss There is an intermittent wiring problem or
hardware fault.
Table 3-20. L3 Codes (Cont)
L1 L2 L3 Code L3 Description Repair Action