User Manual Part 1

Page 2-29
16 Sep 2015
23-15-29
SYSTEM DESCRIPTION AND INSTALLATION MANUAL
JetWave™ System
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 2-14. Radome Skirt Fairing and LAIM Assembly Position on Aircraft
(10) FMA Bonding
The bonding straps are installed before proceeding with installation of FMA assembly on the
A791 based AIM
or LAIM.
The FMA assembly and KRFU must be bonded to the airframe.
Consult the airframe manufacturer for the correct torque values.
N. FMA Installation Procedure
Following installation activities are detailed
in subsequent sections:
• Installation of the FMA.
• Connecting the waveguide, RF coax interface to the FMA.
• Installation of KRFU and bonding straps.
• Installation of waveguide and coax between FMA and KRFU.
• Connecting Bulkhead Interface, KRFU power and control interfaces.
• Position and installation of radome.
(1) Installation of the FMA Assembly