System Description

Page 5-4
28 Feb 2018
23-15-45
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
Aspire-200
© Honeywell International Inc. Do not copy without express permission of Honeywell.
9. To accept the existing value, press ENTER.
10.Restart the HDU.
You can restart the HDU using menu 2, option Z.
To configure an LES ID for all Ocean Regions:
1. Connect to the HDU maintenance port—see “Connecting to the Aspire-200
Maintenance Port” on page 1.
2. In the maintenance menus, press CTRL + N to navigate to menu 3.
3. In menu 3, to access Ocean Region Parameters, press i.
The LES OD prompt appears.
4. Type the LES ID and press ENTER.
D. Configuring the APN
The APN enables the Aspire system to access your SBB
service provider’s network.
Contact your service provider to obtai
n your APN.
To configure the APN:
1. Connect to the HDU maintenance port—see “Connecting to the Aspire-200
Maintenance Port” on page 1.
2. In the maintenance menus, press CTRL + N to navigate to menu 3.
3. In menu 3, to access miscellaneous EEPROM parameters, press m.
The list of miscellaneous EEPROM parameters appears.
SATELLITE SERVICES (A=AERO S=SWIFT64 B=SBB) (ie, AB) ?
This command sets the LES id's in all the ocean regions to the same
provider LES id ?
MISCELLANEOUS PARAMETERS
88 CHANNEL CARD CONFIGURATION 99 VSWR ERROR THRESHOLD
89 DATA I/O ETHERNET DUPLEX MODE 100 NAV1 TYPE
90 DATA I/O APN 101 NAV2 TYPE
91 MIN SAT LOOK ANGLE 104 MAXIMUM IGA POWER
92 PREEMPTABLE CALLS 105 MAX ORDER FOR INTERMOD CHECK
93 BGAN/SWIFT64 HYSTERESIS TIMEOUT 106 ENABLE PAP
94 ANTENNA MOUNTING ANGLE (ROLL) 107 PAP USER NAME
95 ANTENNA MOUNTING ANGLE (PITCH) 108 PAP PASSWORD
96 ANTENNA MOUNTING ANGLE (ROTATION) 109 LNA TO SDU RX THRESHOLD
97 RT-CHANNEL RESERVED POWER
WHICH PARAMETER # <CTRL> N for next page ?