System Description
Table Of Contents
- TITLE
- Honeywell Materials License Agreement
- RECORD OF REVISIONS
- SERVICE BULLETIN LIST
- LIST OF EFFECTIVE PAGES
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- INTRODUCTION
- EQUIPMENT DRAWINGS
- INSTALLATION
- SYSTEM SETUP
- TROUBLESHOOTING
- APPENDIX A: SPECIFICATIONS
- 1. HDU Inmarsat Terminal
- 2. Integrated Power and Low-noise Amplifier and Diplexer (IPLD)
- 3. External Satcom Configuration Module
- 4. Blade Antenna
- 5. AMT-3500 Intermediate Gain Antenna
- 6. AMT-1800 High Gain Antenna
- 7. AMT-3800 High Gain Antenna
- 8. AMT-700 High Gain Antenna
- 9. CNX-200Series 2 Network Accelerator
- 10. CCU-200
- 11. CNX-250
- 12. CNX-900
- APPENDIX B: GLOSSARY
Page 4-17
28 Feb 2018
23-15-45
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
Aspire-200
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Figure 4-2 Remote Lamp Panel Circuit
Remote lamps are available on connector pins:
• MP-10A—Power
• MP-10B—Channel available.
5. Cabling Requirements
In single point cabling, the cable shield is terminated at one end only via a connector or suitable crimp
terminal.
Table 4-3 Cable Shielding and Termination Specifications
Cable Conductor Type
Single
Point
Multiple
Point
Minimum
Conductor
Coverage by
Shield
Power Lines Single conductor, stranded N/A N/A N/A
Serial Data (RS-232) Twisted pair, stranded Yes 85%
Ethernet Data Twisted pair, stranded Yes 85%
ISDN Data Yes 85%