System Description

Page 4-2
28 Feb 2018
23-15-45
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
Aspire-200
© Honeywell International Inc. Do not copy without express permission of Honeywell.
3. Mechanical Installation
This section includes information about installing the equipment in the core Aspire-200. Contact Honeywell
about installation kits that include mating connectors and cables.
A. HDU
Install the HDU in a standard 2-MCU rack. The Aspire-200 ships only the equipment
in the
core system. The customer is responsible
for the mounting tray, mating
ARINC 600 connector and cables.
Carlisle Interconnect Technologies supplies 2-MCU ARINC 600 shipping kits in
various configurations, provided in Table 4-1. You can contact Carlisle at
www.carlisleit.com.
The HDU rear connector is RADIALL NSXF1R10
1Y0012. The mating connecto
r is
supplied by the customer.
B. IPLD
You can install the IPLD in one of two orient
ations described in Figure
3-3 on page
3-5.
Table 4-1 Carlisle Kits
Carlisle Part Description
120-29256-101 Aspire-200 Install Kit (AMT-700)
120-29256-102 Aspire-200 Install Kit (AMT-1800/3500/3800)
120-29256-103 Aspire-200 Install Kit (LGA)
120-232154-101 Aspire-200 Install Kit (AMT-700) tray with isolators
120-232154-102 Aspire-200 Install Kit (AMT-1800/3500/3800) tray with isolators
120-232154-103 Aspire-200 Install Kit (LGA) tray with isolators
120-29255-101 Female DB26 kit for Aspire-200 SCM
120-21002-102 CCU-200 connector kit
120-21002-104 CCU-200 wire kit
6092-101 2 MCU S/S W/ BOTTOM AC FAN
200-91002-101 2 MCU S/L W/REAR AC FAN
6092-102 2 MCU S/S W/BOTTOM DC FAN
200-92144-101 2 MCU S/L W/REAR DC FAN
6054-101 2 MCU S/S NO FAN
6051-101 2 MCU S/L NO FAN