System Description
Table Of Contents
- TITLE
- Honeywell Materials License Agreement
- RECORD OF REVISIONS
- SERVICE BULLETIN LIST
- LIST OF EFFECTIVE PAGES
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- INTRODUCTION
- EQUIPMENT DRAWINGS
- INSTALLATION
- SYSTEM SETUP
- TROUBLESHOOTING
- APPENDIX A: SPECIFICATIONS
- 1. HDU Inmarsat Terminal
- 2. Integrated Power and Low-noise Amplifier and Diplexer (IPLD)
- 3. External Satcom Configuration Module
- 4. Blade Antenna
- 5. AMT-3500 Intermediate Gain Antenna
- 6. AMT-1800 High Gain Antenna
- 7. AMT-3800 High Gain Antenna
- 8. AMT-700 High Gain Antenna
- 9. CNX-200Series 2 Network Accelerator
- 10. CCU-200
- 11. CNX-250
- 12. CNX-900
- APPENDIX B: GLOSSARY
Page 2-6
28 Feb 2018
23-15-45
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
Aspire-200
© Honeywell International Inc. Do not copy without express permission of Honeywell.
B. Introduction to the Cabin Network
The cabin network enables aircraft operators to offer various data and voice
services to passengers in th
e aircraft cabin. The Aspire-200 can distribute the
various services to the aircraft cabin and connect the users to ground data and voice
networks.
Figure 2-2 Cabin Network
Power
43.4 W maximum
Mounting
Mounts using ¼ in (10-24 mm) fasteners
Software DO-178B Level E
Clearances 2 in. (51 mm) clearance recommended
CNX-900 Dimensions 2MCU ARINC 600 Form Factor
Weight 6.4 pounds (2.39 kg)
Power 45 W Maximum, Nominal 25 W
Environmental RTCA DO-160G
Software RTCA DO-178B Level E
Clearances At least 1 in. (25 mm) to the left
At least 2.25 in. (57 mm) to the right
At least 1 in. (25 mm) in front
At least 3 in. (76 mm) above
Table 2-2 Specification Overview of ASPIRE-200 Components
Component Characteristic Specification