System Description
Table Of Contents
- TITLE
- Honeywell Materials License Agreement
- RECORD OF REVISIONS
- SERVICE BULLETIN LIST
- LIST OF EFFECTIVE PAGES
- TABLE OF CONTENTS
- ABOUT THIS MANUAL
- INTRODUCTION
- EQUIPMENT DRAWINGS
- INSTALLATION
- SYSTEM SETUP
- TROUBLESHOOTING
- APPENDIX A: SPECIFICATIONS
- 1. HDU Inmarsat Terminal
- 2. Integrated Power and Low-noise Amplifier and Diplexer (IPLD)
- 3. External Satcom Configuration Module
- 4. Blade Antenna
- 5. AMT-3500 Intermediate Gain Antenna
- 6. AMT-1800 High Gain Antenna
- 7. AMT-3800 High Gain Antenna
- 8. AMT-700 High Gain Antenna
- 9. CNX-200Series 2 Network Accelerator
- 10. CCU-200
- 11. CNX-250
- 12. CNX-900
- APPENDIX B: GLOSSARY
Page 5-9
28 Feb 2018
23-15-45
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
Aspire-200
© Honeywell International Inc. Do not copy without express permission of Honeywell.
8. To confirm the parameter values entered navigate to any of the menu selections
in steps 5, 6, or 7. Select the menu option to display the current parameter value
then hit <ESC> to terminate the menu option if you don’t want to enter a new
parameter value. If the displayed parameter’s value is incorrect a new
parameter value may be entered.
2. Configuring Dialers
Dialers enable your computer to connect to the Internet or other networks. You can configure a dialer for
each type of Inmarsat service available on your system.
A. Configuring a SwiftBroadband Dialer (Windows XP)
To configure a dialer to access SBB services on an Ethernet connection:
1. Click the Star
t button, point to Settings, and then click
Control Panel.
The Control Panel window appears.
2. Double-click Network Connections.
The Network Connections window appears.