User's Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion™ HSD-X and HSD-Xi High-speed Data Terminal
23-15-30 1-8
8 MAY 09
Table 1-4
LED LED Color
Description
(
when illuminated)
Top Green MP10 A Power - This output is
illuminated if the
unit has power. It flashes if the HSD-Xi has an
active call.
Middle Red MP10C HSD-Xi Fail - This output is
illuminated if
the HSD-Xi has a fault.
Bottom Green MP10 B - Channel Available - This output is
illuminated when the H
SD-Xi is registered and
attached to a network operating in GAN or BGAN
mode, or if the HSD terminal has allocated power
to the HSD-Xi.
Front Panel LEDs
D. Fault Conditions
The HSD-Xi terminal can indicate one of the following fault conditions. Upon detection of
a
fault condition, the red colored Fault LED is illuminated.
• Channel card fault
• HPA fault
• Internal ROM fault
• Internal RAM fault
• Over temperature fault
E. HSD-Xi Maintenance Port
The HSD-Xi maintenance port provides access to the HSD
-Xi maintenance utility which
is a program that can monitor the HSD-Xi and test HSD-Xi functions.
The HSD-Xi maintenance port utility
is also used to update the HSD-Xi software. For
information on how to use the maintenance port utility in console mode, see Connecting
to the HSD-Xi terminal through the network mode HSD Console Mode.
The HSD-Xi maintenance port connector is a female, micro-D type M83513/04-B11N.
The rear middle plug of the HSD-Xi terminal provides remote access to the maintenance
port
utility, see the interconnection diagram in Figure 3-9.