User's Manual

Page 3–57
18 September 2007
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion™ HSD-128 High-speed Data Terminal
I
7B FWD Address, BIT 8
I
7C FWD Address, BIT 7
I
7D FWD Address, BIT 6
I
7E FWD Address, BIT 5
I
7F FWD Address, BIT 4
I
7G FWD Address, BIT 3
I
7H FWD Address, BIT 2
I
7J FWD Address, BIT 1
(MSB)
I
7K FWD Address,
Common
Common GND
connection for system
and I/O configuration
and FWD ID
1. BSU Pin nomenclature for Mechanically-Steered Antennae (MA) is manufacturer dependent.
2. “Other antenna types” (OA) represent either conformal or phased array antennae.
Table 3–30. Cooperative Mode ARINC 600 Middle Plug Connection Details
I/O
From
Middle
Plug
Signal Name To Description
O
1A LED 1 Remote Status Panel—
Green
HSD—Power On
(Optional)
O
1B LED 2 Remote Status Panel—
Red
HSD—Fault (Optional)
I/O
1F LED Common Remote Status LED
Panel and
closed side
of N.O. Remote Reset
switch (if used)
LED Common
O
1G Maint Port Tx (Out) Maint Port serial data,
DB9S-2
Maintenance
Laptop/PC,
for Remote access
I
1H Maint Port Rx (In) Maint Port serial data,
DB9S-3
I/O
1J Maint Port Signal
GND
Maint Port serial data,
DB9S-5
Table 3–29. Cooperative Mode ARINC 600 Top Plug Connection Details
I/O
From
Top Plug
Signal Name To Description