User's Manual

SATCO
M
M
A I NTENANCE
STATUS
TERMI NAL TRANSMI T
OK NOR
M
AL
<HEADSET CONF I G
<PART NU
M
BERS
RESET SATCO
M
SYSTE
M
NOT AVA I L - I N A I R
RETURN>
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion® HSD-440 Mark 2 Terminal
23-15-30 2-22
3 JUN 10
The maintenance menu displays the following information:
• Terminal status on the line below TERMIN
AL—Terminal status may be
OK or FAULT.
• Transmit status on the line below TRANSMIT—Transmit status may be
NORMAL or INHIBITED.
• Air/Ground status on the line below RESET SATCOM SYSTEM—When
set to ON GROUND, the system is on the ground and can be reset.
When set to NOT AVAIL – IN AIR, the system is in the air and cannot
be reset.
(b) Viewing Terminal Part Numbers
To view terminal part numbers:
1. On the main page of the MCDU, press the key next to SUBMEN
U.
The SATCOM SUBMENU page appears.
2. On the SA
TCOM SUBMENU page, press the key next to MAINTENANCE.
The SATCOM MAINTENANCE page appears.
3. On the SA
TCOM MAINTENACE page, press the key next to PART
NUMBERS.
The SATCOM PART NUMBERS page appears.
The part numbers menu displays the following information:
• HSD-440 Mark 2 Terminal part number and version
•
HSD-440 Mark 2 Terminal software load and version
• 8-digit ICAO ID
• 3-digit HSD-440 Mark 2 Terminal serial number
• 6-digit (hexadecimal) Forward IDs (FWD ID 1 and FWD ID 2)