User's Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion® HSD-440 Mark 2 Terminal
23-15-30 2-14
3 JUN 10
This section will help you perform the following
tasks:
• Viewing Flight Information
• Logging On and Off
• Viewing Channel Information
• Configuring Headsets
(7) Viewing Flight Informat
ion
You can view the flight identification from the MCDU.
To view flight information:
1. On the first page of the MCDU’s
main menu, press the key next to SUBMENU.
The SATCOM SUBMENU page appears.
SATCOM SUBMENU
LOG-ON STATE
LOGGED - OF F
<LOG-ON
AERO CHANNEL
STATUS>
HSD CHANNEL
STATUS>
FLT ID
12345
MA I NT ENANCE >
RETURN>
You can view the following information from this screen:
• Flight identification on the line below FL
T ID
(8) Logging On and Off
You can use the MCDU to initiate a manual
or automatic logon from the HSD-440
Mark 2 Terminal to the satellite network.
The HSD-440 Mark 2 Terminal boot-up log
on mode is specified in the
Logon/Handover Policy in the ORT. You can set this parameter to automatic or
manual. After the terminal has finished the boot-up process, you can use the MCDU
to log off (from an automatic logon) or to initiate a manual (constrained) logon.
During an automatic logon, the syst
em selects the most appropriate GES depending
on HSD-440 Mark 2 Terminal location.
During a manual logon, you must select
the GES. Even if the ORT parameter is
configured for automatic logon, you can still constrain the terminal to logon using a
particular GES.