User's Manual

Table 2-3 Dial Code Prefixes for System Overrides
Reason for Override
Dial Code
Pr
efix
Example Dialing Sequence
Use this dial code prefix to override the default
LES/GES configu
red in the system.
This dial code prefix signals the system to
ove
rride the default LES/GES and use the
selected LES/GES instead. (See Figure 2-2
or contact Inmarsat for Swift 64 LES/GES
codes)
901 +
LES/GES
CO
DE
901 + LES/GES CODE +
Inter
national Code + Country Code +
Area Code + Telephone Number +
POUND KEY
901 + 002 + 00 + 1+ 613 +5551212
+ POU
ND KEY
Use with fast (e.g. autom
ated) dialing devices
that cannot produce or add a POUND SIGN
to end the dialing sequence.
This dial code prefix signals the system to
send the c
all after a specified delay in user
input when the POUND SIGN cannot be
entered (about 4 seconds).
902
902 + International Code
+ Country
Code + Area Code + Telephone
Number
902 + 00 + 1+ 613 + 5551212
Use with slow (e.g. manual) dialing devices
tha
t cannot produce or add a POUND SIGN
to end the dialing sequence.
This dial code prefix signals the system to
send the c
all after a specified delay in user
input (about 20 seconds).
903
903 + International Code
+ Country
Code + Area Code + Telephone
Number
903 + 00 + 1+ 613 + 5551212
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion® HSD-440 Mark 2 Terminal
23-15-30 2-10
3 JUN 10
(2) Mobile-to-Mobile Communication
The HSD-440 Mark 2 Terminal provides a two-way link for aircraft-to-aircraft
communic
ation. Calling aircraft-to-aircraft requires additional information. You need
to know the IMN of the device or service on the aircraft you are calling.
Figure 2-2 illustrates the Mobile-to-Mobile dialing
sequence.
Figure 2-2 Mobile-to-Mobile Dialing Sequence