User's Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion® HSD-440 Mark 2 Terminal
23-15-30 2-7
3 JUN 10
L. Verifying Configurations
This section describes how to view the HSD-4
40 Mark 2 Terminal configuration
parameters.
To view the HSD-440 Mark 2 Terminal ORT system configuration:
1. In Menu 3, press o.
The List ORT appears.
2. To scroll through the listing until you see a table of ORT ORs, press o.
The LES Access Codes are listed in this table.
3. Using Terminals
This section describes how to perform the following tasks:
• Placing Swift 64 Voice, SwiftBroadband, and Fax Calls
• Placing Calls with the CEPT-E1 Interface
• Using Data Connections
• Operating the MCDU
• Operating the WSC
• Performing Cockpit Communications with the MCDU
A. Placing Swift 64 Voice, Swif
tBroadband, and Fax Calls
Placing voice and fax calls using the HSD-440 Mar
k 2 Terminal is similar to placing an
international telephone call or entering a telephone number for dial-up networking data
calls. Like international telephone numbers, the HSD-440 Mark 2 Terminal
dialing-number-sequence includes different routing components or codes. Figure 2-1
illustrates the required order of the dialing components.
Figure 2-1 Dialing-Sequence Components