User's Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion® HSD-440 Mark 2 Terminal
23-15-30 2-5
3 JUN 10
(2) Changing Default LESs Using the MPU
The LES Access Codes can be configured using the HSD-440 Mark 2 Terminal MPU.
Yo
u can access the MPU by connecting a computer running a VT100 terminal
emulation program to the RS-232 maintenance port on the HSD-440 Mark 2
Terminals. Refer to "Test and Fault Isolation" on page 4-35 for connection settings
and cabling information).
NOTE: When configuring the LES Access Codes using the HSD-440 Mark 2
Terminal MPU, the application requests the input of a Secondary LES
Access Code. At the time of writing, Inmarsat has not implemented the
recognition of the secondary LES value in their systems. However, a valid
Secondary LES Access Code must be entered in the HSD-440 Mark 2
Terminal. The Secondary LES Access Code must be the same as the
Primary LES Access Code.
Inmarsat usually provides LES Access Co
des for the ISPs providing Swift 64
services. Contact Inmarsat directly for an up to date list of LES and Swift 64 service
providers.
For more information, visit In
marsat's Web site at www.inmarsat.com or contact their
Customer Care Service at:
Telephone: [phone]
Fax: [phone]
E-mail: [e-mail]
Table 2-1 Inmarsat Swift 64 LES Operator and Access Codes
Land Earth Station Operator Country
OR
AOR-E AOR-W IOR POR
Telenor Satellite Services Inc. USA 001 001 001 001
Stratos UK/Canada 002 002 002 002
Stratos (Auckland LES)
Xantic (Burum LES)
Xantic (Perth LES)
New Zealand
Netherlands
Australia
012 012 012 012
(a) Equipment Required
You need the following to change the default LES Access Code in an HSD-440
Ma
rk 2 Terminal:
• Computer
• Terminal emulation program (e.g., HyperTerminal)