User's Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion® HSD-440 Mark 2 Terminal
23-15-30 2-1
3 JUN 10
SYSTEM OPERATION
This section provides basic information on registering and operating HSD-440 Mark 2 Terminals,
including the following sections:
• Registering and Activating Terminals
• Configuring Terminals
• Using Terminals
1. Registering and Activating Terminals
Registering and activating HSD-440 Mark 2 Terminals has the following steps:
• Preparing Terminal Information
• Obtaining ICAO Addresses
• Choosing Service Providers
• Registering Terminals
A. Preparing Terminal Information
Before installing the HSD-440 Mark 2 Terminal, obtain an ISN and identify the Swift 64
terminal type and service category.
(1) Obtaining ISNs
Honeywell provides ISNs for the HSD-440 Mark 2 Terminal based on the intended
installation configuration. The last six digits of the ISN form the Forward
ID.
When requesting ISNs, have the following information available:
• End customer name, including contact information
• The part number of the HSD-440 Mark 2 Terminal
• Tail registration number, aircraft type, and serial number of the aircraft on which
the terminal is being installed
• Serial number of the HSD-440 Mark 2 Terminals
• Intended installation configuration mode
(2) Identifying the Swift 64 Service Category and Terminal Type
Inmarsat divides the band of frequencies assigned to Swift 64 high-speed data into
two separate categories: Category A and Category B. Category B frequencies are
restricted to those that do not overlap with Aero H/H+ frequency allocations. HSD-440
Mark 2 Terminals do not require restricted frequency allocations. Register HSD-440
Mark 2 Terminals as Category A systems.