User's Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion® HSD-440 Mark 2 Terminal
23-15-30 1-7
3 JUN 10
Antenna gain (HGA) Minimum: 12 dB
Maximum: 17 dB
Antenna to DLNA loss Maximum: 0.3 dB
DLNA gain Minimum: 53 dB
Maximum: 60 dB
DLNA noise Maximum: 1.8 dB
DLNA to HSD-440 Mark 2
Terminal total loss
Minimum: 6 dB
Maximum: 25 dB (Rx)
HSD-440 Mark 2 Terminal to
antenna loss
Minimum: 1 dB
Maximum: 2.5 dB (Tx) (including DLNA loss)
DLNA insertion loss Maximum: 0.8 dB
External digital interfaces
Control interface up to three MCDU (speed configurable)
two CMUs
Multi-control bus
Top/Port and Starboard antenna bus
Top/Port and Starboard antenna mute
two IRS buses—second port speed configurable
RS-232 maintenance interface
(rear and front connector)
19 200 kbps (For connection specification, refer to
"Maintenance Port Interface" on page 1-17)
Ethernet user interface (2) 10BASE-T input and output for SCPC (Swift 64 Mobile
ISDN) and MPDS using Point-to-Point Protocol over
Ethernet (PPPoE)
Used for placing PPPoE calls using the MPDS, SCPC,
SBB PS, SBB CS services
Controls BGAN secondary contexts via the side AT
handler
Provides status information to the client system using
SNMP
ISDN () ISDN S/T physical interface supporting up to six external
connections to Terminal Adapter (TA) or Terminal
Equipment (TE) devices
One ISDN interface to high-speed data services
POTS tip/ring interface (2) POTS analog interface provides access to services over
Swift 64 or SBB
CEPT-E1 Provides priority 4 (public) calls to the cabin over the
Aero
H+ service
4-Wire interfaces Providing cockpit voice services through the audio
control panel over Aero-H+ services
Table 1-1 HSD-440 Mark 2 Terminal Characteristics and Specifications (Continued)
Characteristic Specification