User's Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion® HSD-440 Mark 2 Terminal
23-15-30 6-37
3 JUN 10
4. Save the spreadsheet as a .csv file.
To import a .csv file:
1. Open the EMS ORT Application.
2. Open an ORT file or create a new file—refer to “Creating an ORT Configuration”
on page 6-33 and “Opening a Saved ORT Configuration” on page 6-35.
3. In the EMS ORT Application, click File, an
d then click Import Phonebook.
The Choose CSV File dialog box appears.
4. Click on the CSV file and then click Ope
n.
The Import Phonebook message confirms the number of entries imported from
the CSV
file, and the EMS ORT Application adds the entries to the ORT
configuration.
D. Exporting an ORT File
The HSD-440 Mark 2 Terminal control processor uses a specia
l file type that you can
export from the EMS ORT Application. When you export a file, the EMS ORT Application
creates two files—one for the control processor and one text (.txt) file for your reference.
To export an ORT file:
1. In the EMS ORT Application, click File, an
d then click Export.
The Choose Output File dialog box appears.
2. Type a new file name (no extension) in the File name bo
x and then click Save.
The ORT configuration is exported (two files are created) and the Export
Docume
nt dialog box appears.
3. Click OK.
E. Loading an ORT File into the HSD-440 Mark 2 Terminal
You can load an exported ORT file into the HSD-440 Mark 2 Terminal through the
Ether
net connection.
To load the ORT file you’ll need:
• A computer with the tftp application
An ethernet cable
• A serial cable—see section b: "Maintenance Port Cable Asse
mbly" on page 4-37.
• The IP address of the terminal’s Ethernet 1 port