User's Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion® HSD-440 Mark 2 Terminal
23-15-30 6-17
3 JUN 10
(3) Configuring GES Service Provider Information
You can configure the GES Name, satellite ID, GES ID, and
priority for up to 33
GESs. GES information is in the secure ORT. Note the GES ID in the following table
is an Octal number. The default settings are:
GES Name Satellite ID GES ID Priority
Aussaguel 0 05 5
Eik 0 02 5
Aussaguel 1 103 5
Eik 1 104 5
Perth 2 205 5
Santa Paula 2 202 5
Perth 3 305 5
Eik 3 301 5
Hawaii 5 120 5
Fucino 6 220 5
Hawaii 7 320 5
To configure GES service provider information:
1. In the list of ORT parameters, type the number next to the GES SER
VICE
PROVIDER TABLE parameter, and then press ENTER.
A prompt appears. For example:
OTHER ENTRIES ARE EMPTY -- ENTER NUMBER OF ENTRY TO
EDIT (1,33) ?
2. At the ENTR
Y prompt, type the entry number to add or edit and then press
ENTER.
3. At the SA
TELLITE prompt, type the number of the satellite ID and then press
ENTER.
4. At the GE
S [octal]? prompt, type the number (in Octal) of the GES ID and then
press ENTER.
5. At the PRIORITY pr
ompt, type a number between 1 and 10 and then press
ENTER.
6. At the GES NAME pro
mpt, type in the GES name and then press ENTER.
7. At the SA
VE ENTRY prompt, to save the changes, type Y, or to cancel, type N.