User's Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion® HSD-440 Mark 2 Terminal
23-15-30 6-16
3 JUN 10
(2) Configuring Satellite Information
You can configure the name, location, and
service available from up to eight
satellites. This does not allow access to the satellite network. Satellite information is
in the secure ORT. The default settings are:
Entry # Region Satellite Name and
L
ongitude
Services
1 0 AORW (W) 53.0W CLASSIC AERO, SWIFT64
2 1
AORE (E) 15.5W
CLASSIC AERO, SWIFT64
3 2
POR (P), 178.0E
CLASSIC AERO, SWIFT64
4 3
IOR (I) 64.0E
CLASSIC AERO, SWIFT64
5 4
MTSAT (4) 142.5E
CLASSIC AERO
6 5
APAC (5), 144 E
CLASSIC AERO, BGAN
7 6 EMEA (6), 25.0E CLASSIC AERO, BGAN
8 7 AMERICAS (7) 98.0 W CLASSIC AERO, BGAN
To configure satellite information:
1. In the list of ORT parameters, type the number next to the SA
TELLITE NAMES
parameter, and then press ENTER.
2. Type the number of the ENTR
Y you want to modify, and then press ENTER.
A prompt appears. For example:
EDITING ENTRY #1 REGION 0:
NAME [AORW] ?
3. At the NA
ME prompt, type the satellite name and then press ENTER.
4. At the ABB
REVIATION prompt, type an abbreviation for the satellite name and
then press ENTER.
5. At the LONGITUDE p
rompt, type the longitude and then press ENTER.
6. At the SA
TELLITE SERVICES prompt, identify the service and then press
ENTER. You can specify one or more of the following:
•Type A for AERO
• Type S for SWIFT64
•Type B for SBB
NOTE: To specify more than one service, for example, classic AERO and Swift
64, type AS.
7. At the SA
VE ENTRY prompt, to save the changes, type Y, or to cancel, type N.