User's Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion® HSD-440 Mark 2 Terminal
23-15-30 6-13
3 JUN 10
To configure the managed range:
1. In the list of ORT parameters, type the number next to the START OF MANAGED
RANGE parameter, and then press ENTER.
2. At the prompt, type the starting address in the format xxx.xxx.xxx.xxx, and then
press ENTER.
The default is 192.168.0.100.
(10)Configuring the Number of Managed Addresses
You can configure the number of managed addresses provided to DHCP clients if
the DHCP server is enabled. The parameter for the number of managed addresses
is in the secure ORT.
1. In the list of ORT parameters, type the number next to the NUMBER OF
MANAGED ADDRESSES parameter, and then press ENTER.
2. At the prompt, type a value between 1 and 100, and then press ENTER.
The default value is 50.
(11)Configuring the Access Point Name
When configuring SBB services, you can configure the access point name in the
secure ORT.
1. In the list of ORT parameters, type the number next to the ACCESS POINT
NAME parameter, and then press ENTER.
2. At the prompt, type a name, and the press ENTER. An example name is
stratos.bgan.inmarsat.com.
The default value is null.
J. Configuring Avionics Parameters
(1) Configuring the Primary Inertial Reference System (IRS)
You can configure the type of equipment that provides input to the primary IRS (IRS
#1). The available options are:
• Inertial—default
•GNSS
•Hybrid
The primary IRS parameter is in the secure ORT.
To configure the primary IRS type:
1. In the list of ORT parameters, type the number next to the PRIMARY IRS TYPE
parameter, and then press ENTER.
2. At the prompt, type 0, 1, or 2, and then press ENTER, where:
• 0—INERTIAL (default)
• 1—GNSS
• 2—HYBRID