User's Manual

SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
eNfusion® HSD-440 Mark 2 Terminal
23-15-30 4-47
3 JUN 10
(d) Menu 4
Figure 4-6 shows an example MPU Menu 4 screen display for an HSD-440 Mark
2 Terminal. Table 4-10 describes the items available in Menu 4.
83 IP Header Compression Turns on IP header compression. Valid values: C (channel
card default = Off), 0 (Off), and 4 through 9 (On)
95 Over Power Margin Do not change.
2
97 Channel Card
Configuration
Configures channel cards for Swift64, SBB, or classic
service.
2
101 Preemptable Calls Configures which calls can be preempted when performing
a satellite handover.
102 BGAN/SWIFT64
Hysteresis Timeout
Configures the time it will take to perform a satellite
handover once a new satellite is visible.
2
Default is 120.0 SEC.
103 Antenna Mounting Angle
(Roll)
Configures the physical antenna mounting angle (Roll).
2
104 Antenna Mounting Angle
(Pitch)
Configures the physical antenna mounting angle (Pitch).
2
105 Antenna Mounting Angle
(Rotation)
Configures the physical antenna mounting angle
(Rotation).
2
106 RT Channel Reserved
Power
Do not change.
2
108 VSWR Error Threshold
Do not change.
2
109 IRS1 Type
Configures the navigation data type for the ARINC 429 IRS
receiver 1.
2
110 IRS2 Type
Configures the navigation data type for the ARINC 429 IRS
receiver 2.
2
113 Maximum IGA Power
Do not change.
2
115 Enable PAP Enables PAP authentication. For configuration instructions,
refer to the HSD Terminal Developer’s Guide,
MN-1252-13005.
2
116 PAP User Name Configures PAP authentication username. Refer to the
HSD Terminal Developer’s Guide, MN-1252-13005.
2
117 PAP Password Configures PAP authentication password. Refer to the HSD
Terminal Developer’s Guide, MN-1252-13005.
2
118 Voice Processor IP
Address
Do not change.
2
119 LNA to SDU RX
Threshold
Do not change.
2
Table 4-9 Menu 3, Item M EEPROM Parameter Descriptions (Continued)
Parameter
Number
Parameter Name Description