User's Guide

DRAFT
Page 2-25
17 Mar 2016
23-15-87
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
ARINC 781-500 SDU and SCM
© Honeywell International Inc. Do not copy without express permission of Honeywell.
B. Viewing BITE Information
The BITE information available in maintenance mode is the same as the BITE information available
in In-Flight mode. For information about the BITE menus, see "Viewing BITE Information" on page
2-14.
C. Starting the Intermod Test
For information and instructions about running the PIM test, see "PIM Test" on page 3-8.
D. Viewing Configuration
The configuration menus available in maintenance mode are the same as the configuration menus
in In-Flight mode. For information about these menus, see "System Part Numbers" on page 2-18.
E. Viewing SATCOM Parameters
As shown in Figure 2-11, the SATCOM PARMS menu provides information about logon, fallback,
and the channel cards.
1 5 10 15 20 24
1
SATCOM MA INT M
E
NU
1/2
1L
3
<INTERMOD TEST OPTIONS
>
3
1R
2L
5
PARMS
>
5
2R
3L
7
AMI RESTORE
>
7
3R
4L
9
RESUME
>
9
4R
DRAFT as of
4 Mar 2016