User's Guide
Table Of Contents
- Introduction
- System Description
- System Operation
- Testing and Fault Isolation
- Maintenance and Repair
- Appendix A: Return Material Authorization
DRAFT
Page 2-22
17 Mar 2016
23-15-87
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
ARINC 781-500 SDU and SCM
Table 2-7 describes the information available in the SATCOM CONFIG 4 menu.
As shown in Figure 2-9, the SATCOM CONFIG 5 menu provides the hardware part number and
serial number of the SCM.
Figure 2-9. SATCOM CONFIG 5 Menu
Table 2-8 describes the information available in the SATCOM CONFIG 5 menu.
Table 2-7. SATCOM CONFIG 4 Menu
Label Description
Hardware Part Number Hardware part number of the HGA
Serial Number Serial number of the HGA
Table 2-8. SATCOM CONFIG 5 Menu
Label Description
Hardware Part Number Hardware part number of the SCM
Serial Number Serial number of the SCM
1 5 10 15 20 24
1
SATCOM CONFIG
5/5
SDU CONF I G MODUL E
1L
3
HARDWARE PART N UMB ER 3
1R
P / N RECE I VED FROM SCM
2L
5
SERIAL NUMBER 5
2R
S / N RECE I VED FROM SCM
3L
7
7
3R
4L
9
<RETURN
9
4R
DRAFT as of
4 Mar 2016