User's Guide

DRAFT
Page 2-18
17 Mar 2016
23-15-87
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
ARINC 781-500 SDU and SCM
B. Channel Information and Bit Errors
As shown in Figure 2-4, the SATCOM LOG 2 menu provides information about the current channel
and the bit error rate.
Figure 2-4. SATCOM LOG 2 menu
Table 2-3 describes the information available in the SATCOM LOG 2 menu.
C. System Part Numbers
As shown in Figure 2-5, the SATCOM CONFIG 1 menu provides the hardware part numbers of the
SDU and the SCM.
Table 2-3. SATCOM LOG 2 Menu
Label Description
Channel # Channel number representation of the P channel, displayed
only when the SDU is logged on, otherwise the display is
blank.
Bit Errors The raw bit error rate.
ICAO The current ICAO address.
Doppler The doppler correction.
1 5 10 15 20 24
1
SATCOM LOG 
2/2
CHANNEL# DOPPL ER
1L
3
14008 -1999HZ
3
1R
B I T ERRORS
2L
5
0
5
2R
ICAO
3L
7
01234567
7
3R
4L
9
<RETURN
9
4R
DRAFT as of
4 Mar 2016