User's Guide

DRAFT
Page 2-14
17 Mar 2016
23-15-87
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
ARINC 781-500 SDU and SCM
(2) To modify an entry, press the button next to the entry. To add a new entry, press the
button next to an empty line.
(3) Type the name associated with the telephone number in the scratchpad and then
press the button next to the name field on the TCP screen.
• The maximum number of characters for a name is 14.
(4) Enter a number in the TCP scratchpad using the following pattern.
00+CC+NNN+NUMBER (for calls within North America)
011+CC+NNN+NUMBER (for International calls)
where:
• 00 and 011 are access codes
• CC is the country code (Country Code may be up to 4 digits)
• NNN is the city or area code
NOTE:
• You can enter up to 18 characters in the scratchpad (including hyphens), but the
maximum number of digits that can be dialed is 17.
• Hyphens are not necessary. If you wish to use hyphens, press the +/- key on the
scratchpad.
(5) Press the button next to the phone number field on the TCP screen.
(6) Press the button next to PRIORITY to select a priority for the phone number.
(7) To save the entry, press the button next to STORE. To cancel the new entry, press
the button next to CANCEL.
(8) Press the button next to CONFIRM.
The entry is saved.
NOTE: You can protect directory entries using the Phonebook ORT parameter. If
an entry is protected, it cannot be modified or deleted. For more
information about the Phonebook ORT parameter, refer to "ORT
Overview" on page 3-7.
D. Viewing BITE Information
From the SATCOM BITE menu, you can view BITE information to determine subsystem health.
To view BITE information:
(a) On the TCP main menu, press the button next to SAT.
(b) On the TCP keyboard, press the NEXT PAGE key to advance to the second page of the
SAT-PHONE menu, and then press the button next to SATCOM BITE.
The SATCOM BITE menu appears.
DRAFT as of
4 Mar 2016