User's Guide

DRAFT
Page 2-10
17 Mar 2016
23-15-87
© Honeywell International Inc. Do not copy without express permission of Honeywell.
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
ARINC 781-500 SDU and SCM
(4) To set the priority, press the button next to PRIORITY.
Available priorities are as follows, all in order from highest to lowest.
• 1 EMERGENCY (EMG)—highest
• 2 OP-HIGH (HGH)
• 3 OP-LOW (LOW)
• 4 PUBLIC (PUB)—lowest.
NOTE: You can only set the priority for a Classic call. All calls made over SBB are
considered equal to public priority.
(5) On the TCP, press the button next to MAKE CALL.
The channel status displays DIALING, RINGING, and then ANSWERED when
connected.
(b) Making Calls from the Telephone Directory
You can make voice calls from the numbers you have saved in the TCP’s telephone
directory. Numbers can be saved in the telephone directory using the TCP or the ORT.
For more information on the ORT, see "ORT Overview" on page 3-7.
To make a call from the telephone directory:
(1) On the TCP main menu, press the button next to SAT.
(2) On the TCP keyboard, press the NEXT PAGE key to advance to the second page
of the SAT-PHONE menu, and then press the button next to DIRECTORY.
The SAT DIRECTORY INDEX menu appears.
DRAFT as of
4 Mar 2016