User's Guide

DRAFT
TITLE PAGE-4
17 Mar 2016
23-15-87
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
ARINC 781-500 SDU and SCM
© Honeywell International Inc. Do not copy without express permission of Honeywell.
WARNING: INCORRECTLY REPAIRED COMPONENTS CAN AFFECT AIRWORTHINESS OR
DECREASE THE LIFE OF THE COMPONENTS. INCORRECTLY FABRICATED SPECIAL
TOOLING OR TEST EQUIPMENT CAN RESULT IN DAMAGE TO THE PRODUCT
COMPONENTS OR GIVE UNSATISFACTORY RESULTS.
Copyright - Notice
Copyright 2016 Honeywell International Inc. All rights reserved.
Honeywell is a registered trademark of Honeywell International Inc.
All other marks are owned by their respective companies.
ARINC 781-500 SDU and SCM SDIM
Document Number: D201601000025, Revision 0
Our products are under continuous research and development. Any information may therefore be
changed without prior notice. Honeywell reserves the right to make improvements or changes in
the product described in this manual at any time without notice. While reasonable efforts have been
made in the preparation of this document to assure its accuracy, Honeywell assumes no liability
resulting from any errors or omissions in this document, or from the use of the information contained
herein.
Honeywell International Inc.
400 Maple Grove Road
Ottawa, Ontario, K2V 1B8
Canada
Reception: 613-591-9064
Product Support: Aerospace Technical Support
1-855-808-6500 (U.S. and Canada) or [phone]
(Inter
national)
Email: [e-mail]
Revision Table
Revision ECO Description
0 NA First release.
DRAFT as of
4 Mar 2016