User's Manual
Table Of Contents
- Customer Response Form
- Record of Revisions
- Service Bulletin List
- List of Effective Pages
- Introduction
- System Description
- System Operation
- 1. Registering and Activating Terminals
- 2. Using the A781-200 System
- 3. Channel Status and System Configuration
- 4. Maintenance Mode
- Installation
- Test and Fault Isolation
- Maintenance and Repair
- Appendix A: Return Material Authorization
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
ARINC 781-200 SDU and SCM
23-15-30 2-30
DATE TBD
Figure 2-13 CONFIG AUDIO 2/2
Table 2-11 describes the information available in
the SATCOM CONFIG AUDIO 2menu.
Table 2-11 SATCOM CONFIG AUDIO 2 Menu
Label Description
AUDIO LINE Switch between 4-wire 1 and 4-wire 2.
PUBLIC CALLS Displays the value of the Ground Initiated Public Call Routing OR
T parameter.
This parameter enables the placing and acceptance of public calls via the
analog audio lines.
TERMINAL ID The terminal ID for the selected audio line interface.
PRIORITY The priority of calls allowed via the selecte
d audio interface. The possible values
are:
• COCKPIT
•PUBLIC
•ALL