User's Manual
Table Of Contents
- Customer Response Form
- Record of Revisions
- Service Bulletin List
- List of Effective Pages
- Introduction
- System Description
- System Operation
- 1. Registering and Activating Terminals
- 2. Using the A781-200 System
- 3. Channel Status and System Configuration
- 4. Maintenance Mode
- Installation
- Test and Fault Isolation
- Maintenance and Repair
- Appendix A: Return Material Authorization
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
ARINC 781-200 SDU and SCM
23-15-30 2-21
DATE TBD
D. System Part Numbers
As shown in Figure 2-6, the SATCOM CONFIG 1 menu provides the hardware part
numbers of the SDU and the SCM.
Figure 2-6 SATCOM CONFIG 1 menu
Table 2-5 SATCOM CONFIG 1 Menu
Label Description
Hardware Part Number Part number of the A781-200 SDU.
Serial Number Serial number of the A781-200 SDU.
PROT Level Code This code is displayed if the SATCOM CONFIG menu is
accessed from the In-Flight menus. It allo
ws access to the
Maintenance Mode MCDU menus. Contact RCI Product
Support for the PROT level code.
Table 2-5 describes the information
av
ailable in the SATCOM CONFIG 1 menu.
As shown in Figure 2-7, the SATCOM CONFIG 2 menu provides the software part
numbers of the equipment in the A781-200 system.