User's Manual
Table Of Contents
- Customer Response Form
- Record of Revisions
- Service Bulletin List
- List of Effective Pages
- Introduction
- System Description
- System Operation
- 1. Registering and Activating Terminals
- 2. Using the A781-200 System
- 3. Channel Status and System Configuration
- 4. Maintenance Mode
- Installation
- Test and Fault Isolation
- Maintenance and Repair
- Appendix A: Return Material Authorization
SYSTEM DESCRIPTION, INSTALLATION, AND MAINTENANCE MANUAL
ARINC 781-200 SDU and SCM
23-15-30 2-12
DATE TBD
4. Press the button to the left or right of the number you wish to dial.
• Pressing the left button loads the number on the Classic Aero channel
• P
ressing the right button loads the number on the SwiftBroadband
channel.
The MCDU returns to page one of the SAT
-PHONE menu and the number
is displayed under the selected channel.
5. To set the priority, press the button next to PRIORITY.
Note: You can only set the priority for a Classic call. All calls made over SBB
are pu
blic priority.
6. Press the button next to MAKE C
ALL.
The channel status displays DIALING,
RINGING and then ANSWERED
when connected.
(c) Answering Calls
To answer a call:
• On the ACP, tra
nsition the MIC ON discrete from ON HOOK to OFF HOOK.
OR
On the MCDU, press the button next to ANSWER to a
nswer the call or press
the button next to REJECT to reject the call.
(d) Ending Calls
To end a call:
• On the MCDU on the SAT-PHONE 1/2 menu, press the button next to END
CALL
OR
On the ACP, assert the Place/End sw
itch.