User's Manual

ABBREVIATED COMPONENT MAINTENANCE MANUAL
1458-A-1101 / 1458-A-1300
1. Planning Data (TASK 23-15-30-99C-809-A01)
A. Reason for the Job (Subtask 23-15-30-99C-017-A01)
(1) Use these procedures to prepare the A350 SDU and SCM for storage or transportation. The
function of these procedures is to make sure that the A350 SDU and SCM has protection from
dust, moisture, and other contamination.
B. Job Setup Data (Subtask 23-15-30-99C-018-A01)
(1) You can use equivalent alternatives for the special tools, fixtures, equipment, and consumable
materials. The user must find equivalent alternatives.
(2) Refer to Table 27 for the specified special tools, fixtures, and equipment in this section.
(3) Refer to H4/H8 CAGE Codes (available at http://www.logisticsinformationservice.dla.mil) for
manufacturer’s address.
Table 27. Special Tools, Fixtures, and Equipment
Number Description
Source
Not applicab
le
Not applicab
le
Not applicab
le
WARNING: BEFORE YOU USE A MATERIAL, REFER TO THE MANUFACTURERS’ MATERIAL
SAFETY DATA SHEETS. SOME MATERIALS CAN BE DANGEROUS.
C
AUTION: DO NOT USE MATERIALS THAT ARE NOT EQUIVALENT TO HONEYWELL
SPECIFIED MATERIALS. MATERIALS THAT ARE NOT EQUIVALENT CAN
CAUSE DAMAGE TO THE EQUIPMENT AND CAN MAKE THE WARRANTY NOT
APPLICABLE.
(4
)
Re
fer to Table 28 for the specified consumable materials in this section.
Table 28. Consumables
Number Description
Source
Not applicable Not applicable Not applicable
(5) The list that follows identifies Honeywell publications that are related to this section:
• Not applicable.
EFFECTIVITY
ALL
23-15-30
Page 67 of 70
5 Oct 2012
© Honeywell International Inc. Do not copy without express permission of Honeywell.
Interim DRAFT for FCC Approval Purposes
Do Not Use for Maintenance
10-Feb-2013