Specifications

EMPYRE ELITE INSTALLATION AND OPERATION MANUAL • 2011 23
REFERENCE
Furnace Specications Model 100 Model 200
Heat Output (Peak)* 125,000 BTU/hr 37.0KW/hr 200,000 BTU/hr 58.6KW/hr
Heat Output (8 Hour Burn)* 66,000 BTU/hr 19.3KW/hr 110,000 BTU/hr 32.2KW/hr
Heat Output (12 Hour Burn)* 45,000 BTU/hr 13.2KW/hr 72,000 BTU/hr 21.1KW/hr
Furnace Width 28 in 71 cm 31.5 in 80 cm
Furnace Height 48 in 122 cm 57 in 145 cm
Furnace Length 52 in 132 cm 61 in 155 cm
Firebox Dimensions 19w x 21h x
28d in
48w x 53h x
71d cm
22.5w x 26h x
31.5d in
57w x 66h x
80d cm
Firebox Volume 6.1 ft
3
173 L 10 ft
3
283 L
Loading Door Opening 16 x 14 in 41 x 36 cm 18.5 x 16.5 in 47 x 42 cm
Flue Collar Diameter 6 in 15 cm 6 in 15 cm
Log Length 24 in 61 cm 25 in 64 cm
Log Diameter 6 in 15 cm 6 in 15 cm
Furnace Weight 945 lb 429 kg 1,400 lb 635 kg
Water Capacity 60 US Gal. 227 L 112 US Gal. 424 L
Note: Weights and measurements may vary slightly.
*Will vary based on fuel type and quality.
For overall unit dimensions, see Figure 1, page 24
For brick layout, see Figure 2, page 24
For refractory layout, see Figure 3, page 24
Options Model 100 Model 200
Electric Element Yes Yes
Extension Legs Yes No
Power Flue Cleaning Tool Yes Yes
Contact your local dealer for more information on the options available for your furnace and to order furnace
replacement parts through your local dealer. Identify parts by referring to components on pages 8, 9 and 20.
Furnace replacement parts must be purchased through Pro-Fab Industries by your dealer in order to maintain the
furnace warranty.
Ash Rake and Brush Hanger Assembly
Ash Rake and Brush Hanger is supplied, as well as two
#12 x ¾” screws used to mount it. Hanger can be mounted
on a convenient location near the furnace or mounted directly
on the furnace. If mounting on the furnace, do so in the
location indicated in Figure 1 in order to avoid screws
interferingwithelectricalorthewaterjacket.Donotuse
screws longer than ¾”.
Figure 1
Hanger
Screws