User`s guide

22
Video Overlay Settings
Use the Video Overlay Settings to adjust the quality of video or DVD playback on
your display.
Note that these settings affect videos that are created using the hardware overlay, but
have no effects on videos created using software overlays, or a blit process such as
VMR.
Note: If any setting changes you make have no effect on the video overlay after you
click Apply, close the video overlay and then re-open it.
Overlay zoom controls
Zoom Control
Zoom control lets you zoom into the rendered video. Use the drop-down menu to
select the display type to zoom and use the quadrant selection to select the screen
region to zoom.
Video Overlay sets the zoom selection to the display on which the overlay video is
rendered.
Both apply the zoom selection to both the device on which the overlay video is
rendered and the full screen display you selected for the video mirror feature.
Note: Video players that cannot detect the presence of Video Mirror may not update
the zoom factor immediately while displaying a still frame.
Out/In
The Out/In slider lets you zoom in on or out of the selected portion of the video