MP516A DIGITAL MP3 PLAYER USER MANUAL
Function overview MP3/WMA Digital Player ;USB 2.0 2GB memory capacitable The system supports Win2000/WinXP/WinME systems formatting（FAT16/FAT32 format is supported） Low power loss, 12 hours continuous playing Supply DRM10 function Operation direct 1.Battery Pull out the USB cover and push away the battery cover, put in battery in the correct way. Shut the battery cover and - USB cover. Note: if do not use the device for a long time, please take off the battery. 2.Power on/off 2.1.
5.DRM10 function PC requirements: The driver is required for Windows XP + SP1 and Windows Media Player 10 or above version.( WMP10 for short, setup by downloading directly, not by upgrading from WMP9 ) (1) Download the songs protected by copyright to your hard drive. (2) Plug USB cable to connect MP3 player to your PC .
(4) Open the downloaded files of songs, drag them to the area of Sync (left area on the above graph) by mouse, then click “Start Sync” as follow graph. (5) Unplug the USB cable when download finished. Select the mode of playing music after power on your PC, the songs protected by copyright can work. Computer connection application 1.
2. Computer connection and realization of flash disk function 1. USB transmission and MP3 file up-load (1)If your operation systems are WinME, Win2000, Winxp or Win2003, and they need no installation of driver program. After proper connection of USB data line, a movable disk will appear in the resource manager of WINDOWS.
(1) Insert the installation disk affiliated to the player into CD-ROM. (2) Use the right key to open the driver disk and run “Disk icon SETUP.EXE” file. The following picture will appear.
（4）Click “NEXT” to enter the following picture: (5) Click “OK” restart the computer 14 Upgrade the firmware Step 1 Connect the MP3 player to your computer with USB cable, press the player’s MODE key switch to removable disk mode; Step 2 Put the CD of attachment in computer CD Rom and find the FWISP.exe by the path: \Firmware upgrade\ Step 3 Double pick the file of FWISP.
Step 4 pick [OK] to continue 7
Step 5 pick [YES] to continue Step 6 pick [OK] to finish the upgrade operation 8
Product Technical specifications Item Parameter Music format MPEG 1.2,2.5 Layer 3，WMA Band rate 56Kbps～256Kbps FR 20Hz～20KHz SNR ≥86DB CSD ≥85DB(1KHZ referenced signal) FR -3DB ( 20HZ～20KHZ ) Interface USB1.1、2.
