Specifications

16
For example: If you want to swap between Channel 8 and Channel 12, the specific operations
are as follows:
a. First select “SWAP to” submenu according to the following steps ,
b. Press ► / ◄ button and the above Channel swap menu will appear.
Press ▼/▲button to select “Src Channel ” (Yellow indicates the right selection) in the
menu, and then press ► / ◄ button until the Channel number on the right skips to “8”;
Press ▼/▲button once again to select “ Tag Channel ” in the menu, and then press ► / ◄
button until the Channel number on the right skips to “12”.
c. Finally, press ▼/▲button to select the “ Exchange ” submenu. Then press ► / ◄ again to
complete the swap between Channel 8 and Channel 12.
(5) Selection and function operation of PC Menu (PC Setup)
(Please note: To select the PC Menu, you will have to ensure that the current signal mode is PC)
 Press “MENU” button, and the picture menu (Picture) will appear
 Press ► /◄ until the PC menu (PC) appears
 Press ▼/ ▲ button to be able to select submenus in the PC Menu (PC) (Yellow indicates
the right selection). After the right submenu is selected, press ► / ◄ button once again to be
able to adjust different functions under this menu. For the adjustment of specific functions,
refer to the table below: