Specifications

15
(4) Selection and function operation of Tune menu


 Press MENU button, and the picture (Picture) menu appears
 Press ► /◄ until the Tune menu (Tune) appears.
 Press ▼/ ▲ to be able to select the submenus (Yellow indicates the right selection) on the
Tune menu (TUNE). After the right submenu is selected, press ► / ◄ once again.
To press this button, you will be able to adjust different functions under this menu. For the
adjustment of specific functions, refer to the table below:
Submenu options ► / ◄ MENU Prompt
Channel To decrease or increase frequency numbers
Skip To turn on/off frequency skip
Band To select bands: VHF L VHF H — UHF
Fine tune For fine tuning from low/high
Manual Scan Drop/rise in frequencies To stop manual scan
Auto Scan To start automatic scanning from current
channel position
To stop automatic
scan
Swap to To set frequency swap (For details, see the
figure below)