Specifications

10
Description of Operation
1. Power on/off
After power is connected, press power on/off button, and the power indicator will be on; if the
indicator is red, it indicates that the TV set is in the standby state. Press “Power” button on the
remote control, and the power indicator will turn green, so the TV set is on. Please disconnect
power supply before leaving the TV out of use for an extended period of time.
Note:
(1) In the TV signal mode, when there is no signal for 5 minutes or more, the TV set will
automatically access the standby state. If restart is required, please press “power” button or CH
“▼/▲” button on the remote control.
(2) Try not to repeat switching on/off the unit repeatedly within a short time.
2. Input switching
Press “Source” button to select the input signal with the switching sequence as
TV -- SCART1 – SCART2  AV  Component  HDMI1— HDMI2  PC
3. Volume control
Press the functional buttons on the panel or “VOL+ or VOL-” button on the remote control to
increase or decrease Volume. The volume control menu will be displayed on the screen.
4. Mute
Press “Mute” button on the remote control to switch off sound, and the mute mark will be
displayed on the screen; press “MUTE” button or VOL+, VOL- button once again to cancel mute.
5. Screen display of input signals
Press “DISPLAY” button on the remote control, and the current input signals will be displayed
on the screen. In several seconds, such display information will disappear automatically.