User guide

31
Chapter 3 Using the LCD TV
ENGLISH
 Press to select the item to control.
 Press to adjust the desired value.
 CONTRAST Controls the difference between the
brightest and darkest regions of the picture.
BRIGHTNESS Controls the overall brightness of the picture.
COLOR Controls the colour intensity.
SHARPNESS Increase this setting to see crisp edges in the picture; decrease it for soft
edges.
VIDEO MODE This setting controls the overall appearance of the picture, and is chosen
from among the following options: PRESET, SOFT, User.
If VIDEO MODE is set to ‘User’, all options may be adjusted
according to personal preference; all settings are saved.
AUTO TUNE Allows adjustment for the fine tune level by hand if signal is too weak or
picture is blurry.
PHASE Increase the focus clarity in the picture and image stability.
H POSITION Controls the horizontal position of the picture.
V POSITION Controls the vertical position of the picture.
Customizing the Picture Settings
 Press the button to turn the LCD TV on.
 Press the MENU button to display the Main Menu :
Use to select VIDEO ADJUST, the VIDEO ADJUST menu will appear on
the screen.
CH+
CH-
VIDEO ADJUST
CONTRAST ( 45 )
BRIGHTNESS ( 45 )
COLOR ( 19 )
TINT ( 35 )
SHARPNESS ( 2 )
VIDEO MODE ( SOFT )
: EXIT
: SELECT : ADJUST
VIDEO ADJUST
AUTO TUNE ( OFF )
CONTRAST ( 50 )
BRIGHTNESS ( 50 )
PHASE ( 19 )
H SIZE ( 50 )
H POSITION ( 50 )
V POSITION ( 19 )
: EXIT
: SELECT : ADJUST
If the signal source is video singal,
the menu displays:
If the signal source is PC singal,
the menu displays
:
CH+
CH-
VOL-
VO
L+
MAIN MEMU
VIDEO ADJUST 
AUDIO ADJUST 
SYSTEM SETTING 
CHANNEL SETTING 
CLOSED CAPTION 
V-CHIP BLOACK

FACTORY PRESET 
: EXIT
: SELECT : ADJUST