Specifications

26
adaptor rather than the bus-power. Please note that you can only connect your
BPR-101 to double USB plugs to get bus-power when your HDD capacity is below
40G.
■ If your operating system is Windows 98, please check if you install proper USB
driver in your operating system.
Problem: When BPR-101 acts as a host device, I cannot copy the files in
the USB slave device into my HDD．
■ Please make sure that you didn’t press COPY button during copy process. If you
press COPY button more than one time, you will stop copy process. If so, please
press COPY again to start a new copy process.
Problem: The USB slave device is not compliant with BPR-101.
■ Please note that the USB slave device must be in FAT16/FAT32 format to be
compliant with BPR-101.
Problem: I cannot preview the video clips.
■ Please check if you connect AV cable’s three terminals to your TV correctly.
■ Please check if you tune your TV to the correct channel for video preview.
■ Please check if the video output device works properly.
Problem: Sudden interruptions during recording.
■ Please check if the connected device, such as DV/DVD player, is in stable power
supply.
■ Please check if your HDD reaches full capacity. If so, please spare some free
capacity and try again.
Problem: I cannot play my recorded clips.
■ There might be sudden interruptions during recording. If so, the file is in
incomplete structure and cannot be resumed. Please record the video clips again.
■ There is some bad track. If so, please repair the bad track and try again.
■ Please check if the file is in supported format. If not, please convert the file format
by proper software and try again.