Specifications

25
Tips and Trouble shootings
Problem: Nothing is displayed on TV.
■ Please check if BPR-101 is in standby status. If so, please press POWER button
to wake it up.
■ Make sure that you select proper audio/ video input source for TV and please
check if you connect AV cable’s three terminals to your TV correctly.
Problem: No sound.
■ BPR-101 is in mute mode. Please press MUTE button to resume the sound.
■ Please check if an external audio output, such as an external speaker, is turned
on and in proper volume.
■ Please check if you connect AV cable’s three terminals to your TV correctly.
■
If you are playing MPEG-2 or VOB file, you need to use AUDIO button to select a
proper audio stream.
Problem: The remote control doesn’t work.
■ Please point the remote control to BPR-101 directly within 5-meter range without
barricade between.
■ Maybe you need to replace the battery in the remote control.
Problem: “No disc” is displayed on TV.
■ Please check if you install the HDD properly.
■ Please make sure that there are only primary partitions in HDD. Extend and logic
partitions may not be recognized.
Problem: I cannot see the files in my HDD through BPR-101 on TV.
■ Please make sure that partitions of HDD are in FAT16/FAT32 format rather than
NTFS. BPR-101 doesn’t support NTFS format and therefore won’t show the
content in such format on TV.
Problem: Abnormal situations: I cannot play a file in supported format/ I
cannot play fast forward/ there are mosaic images.
■ Maybe you need to defrag your HDD.
■ Please check all the files in you HDD are in good condition. If there is one bad file
in your HDD, you cannot view and play the rest files.
Problem: When I press “SLIDE” button, the system halts.
■ There are too many photos or music files in your HDD partition. It will take a long
time to response and to start music-slideshow.
Problem: When my BPR-101 is connected to computer, my computer
cannot detect BPR-101 device.
■ In such situation, we recommend you connect your BPR-101 to the power